INNOVATIVE PIPE
SUPPORT SOLUTIONS
siFramo 80

End Support STA F 80

Application

Plug-in component designed to create an endplate at the open end of a Beam Section TP F80 or a Cantilever bracket AK F80. By means of the round holes in the base plate a direct connection to excisting cast-in channels is possible.

Installation

Depending on the version, following mountings solutions are possible:

a) With 2x4 Self Forming Screws FLS when used to connect 2 Beam Sections.
b) With 4 Self Forming Screws FLS applied to the octagonal insert and 2 suitable wall anchors/fixings when connected to the building structure.

The Beam Section TP F 80/80 connected to the End Support STA F 80 has to be screwed with 4 Self Forming Screws FLS F. On each of the opposite sides 2 Self Forming Screws FLS F are necessary.

Technical Data

Type
Dimensions of Base plate
[mm]
A
[mm]
B
[mm]
H
[mm]
STA F 80 190 x 80 x 8 14 20 x 11 148
STA F 80-E 165 x 80 x 8 - 20 x 11 148

Configuration:
Base plate welded to octagonal element F 80
Material:
Plate:
Steel, HCP
Octagonal element:
Steel, HCP

Approvals / Compliance

CE mark (Declaration of performance see www.sikla.com/downloads)

End Support STA F DoP PDF | 36.8 KB

TypeW
[kg]
Quantity
[pack]
Part
number
STA F 801.61 192856
STA F 80-E1.51 192863