Product catalogue

Adapter for additional connection options for all Sikla Pipe Clamps equipped with 3G triple thread nut, fixed points and threaded tubes. Adapter has internal threads on both sides.

For efficient assembly of fastening clamps DIN 3015 (light and heavy series) to Channels MS 41 in stainless steel. Particularly useable for assembly in vertical channels or positions difficult to access, this piece replaces the '3rd hand' and offers following further advantages: Compatible with all Sikla Channels MS 41, regardless of the channel's height. No getting stuck of screw heads while moving inside the channel. Plane fixation without projecting after tightening.

Element for connecting Beam Bracket TKO, Angled Beam Bracket SKO, End Support WBD or Pivot Joint GE F to a beam section.

Heavy-duty connection element, which in combination with grub screws (M8 or M10), are suitable for mounting pipes, ducts and equipment to steel beams (I-, T-, U and angle steel beams). The combination with a Universal Joint ss provides for vertically aligned attachment to inclined beams. Can serve as single mounting element, for installing crossbars and for fixing cantilever structures. Due to their special base profile, Beam Clamps TCS can also be slid along and retained in the opening of Sikla Channels MS 41.

Universal clamping element for bi-lateral attachment of crossbars for pipe runs, ducts, cable lines and equipment to steel beams.

Anchor in A4 for push-through mounting in M&E services and plant construction in concrete tensile zones. This anchor combines high permissible loads with close edge and centre distances. Suitable for anchoring in cracked and non-cracked concrete - fixation of pipelines, channels, brackets, etc. in closed rooms - except for damp locations. No special drill required. Drill diameter is the same as the thread size. Simple and quick mounting due to its push-through concept. Drive-in hammer zone for preventing any thread damage.

Recommended for single-armed wall suspension or fixing to other building structures.

For the simple and professional manufacture of crossbars, wall brackets and support frames on the construction site or for pre-assembly.

For simple and professional production of crossbars, wall brackets and support frames on the construction site or for pre-assembly. The stainless steel Channel 41 rails are suitable as guide and support rails for the 41 VA sliding piece. In addition, all CC components in stainless steel can be used with this channel.

The Channel MS 41 D A4 is ideal for creating crossbars when medium loads are involved. Its double rail design allows components to be attached on both sides. The stainless steel Channel 41 rails are suitable as guide and support rails for the 41 VA sliding block. In addition, all CC components in stainless steel can be used with this Channel.

Channel Nut HZ 41 A4 suitable for Channels MS 41 ss.

Hammerset Anchor for multiple attachment in cracked and single attachment in non-cracked concrete. Suitable for fixing pipelines, channels, etc. meeting the respective approval requirements. To be used in structural parts under dry indoor conditions, as well as outdoor constructions (including industrial ambiance and coastal areas) or damp locations provided no special aggressive conditions are given. No special drill is required. Setting Tool for Drive Plug is to be used as setting tool for distance-controlled forced expansion. Suitable for put-before assembly.

Two-piece clamp with thread connection M8 or M10 for the installation of pipelines.

Two-piece pipe clamp with thread connection M8 or M10 and sound absorption lining for the installation of pipelines.

In combination with a channel, End Support WBD 41 ss is particularly suitable for setting up support structures attached to walls, floors and ceilings as a base for frame structures.

Useful addition to Support Brackets for integration in crossbars and other structures composed of stainless steel channels.

Useful addition to Support Brackets for integration in crossbars and other structures composed of stainless steel channels.

Fixing Bracket suitable for frame construction and cross bars composed of channels, as well as for connection to floor, wall and ceiling. Thanks to the high stiffness resulting from the shape also suitable as Support Bracket for projecting racks. When used as support for cross bars, their load capacity increases.

Suitable for Universal Holder, for pipes exceeding 2 1/2'.

Suitable for Universal Holder, for pipes exceeding 2 1/2'.

Ideal for connecting two Sikla Channels MS 41 as well as for mounting the GS G1 slide set for channel system 41.

Stainless steel fastener for creating a screw connection in combination with a nut or an existing thread.

Channel Nut 27 for channels in stainless steel with a width of 27 mm.

For creating or securing a screw connection.