Speed Nut NT CC 27 HCP
In particular useful for installation in vertical channels or where access is difficult.
- Can be used in all Sikla Channels MS 27, independent of the channel's height.
- No getting stuck on bolt heads when sliding in the channel.
- No appearance of settlement after tightening.
Scope of delivery
Channel Nut and Spring are tightely connected.
After inserting the Speed Nut into the channel opening, exert a slight axial pressure. This will cause the nut to turn to the right and engage into the channel. De-installation simply requires the nut to be turned to the left and pulled free. Installation and de-installation do not require tools and may be repeated several times.
Tighten the part to be connected - that's it!
| Fz =|| 1,5 kN|
| Channel Nut:|| Steel, class 5.6, HCP|
| Spring washer:||Sheet metal spring steel, rustproof|