Product catalogue

Quick-installation element for efficient mounting of pipe clamps and other components to Channels MS 27. Time-saving due to a pre-assembled Blockset consisting of 4 individual parts. Easy height adjustment within the channel. Retains position in horizontal and vertical channels during locational adjustment. But still can be moved easily and freely along the channel as required. Grooved rod, prevents unintended unscrewing. Easy cutting of the grooved rod - cutting grooves every 10 mm using Rod Cutter PBC 1.

For cleaning the borehole when using the VMZ, VMU plus and VMH injection systems.

For cleaning the borehole when using the VMZ and VMU plus injection systems.

Anchor for push-through mounting in M&E services and plant construction in concrete tensile zones. This anchor combines high permissible loads with close edge and centre distances. Suitable for anchoring in cracked and non-cracked concrete - fixation of pipelines, channels, brackets, etc. in closed rooms - except for damp locations. No special drill required. Drill diameter is the same as the thread size. Simple and quick mounting due to its push-through concept. Drive-in hammer zone for preventing any thread damage.

Anchor in A4 for push-through mounting in M&E services and plant construction in concrete tensile zones. This anchor combines high permissible loads with close edge and centre distances. Suitable for anchoring in cracked and non-cracked concrete - fixation of pipelines, channels, brackets, etc. in closed rooms - except for damp locations. No special drill required. Drill diameter is the same as the thread size. Simple and quick mounting due to its push-through concept. Drive-in hammer zone for preventing any thread damage.

For fitting Bolt Screws by means of an electric screwdriver.

For creating a metric threaded connection in wood-based materials or plastic dowels in masonry or concrete.

The Support Joint is fixed directly to the flanges of the pipe clamp to provide additional bracing to the overall pipe support. Adjustable brace angle. The Support Joint can be rotated 180° radially about the clamping bolt connections either side of the pipe clamp. Captive pivoting link eye.

Beam Bracket suitable as support for horizontal structures or as reinforcement of bearing constructions on site.

Bracing arm for reinforcement of frames made from Beam Section TP F 80 and/or Cantilever Bracket AK F 80.

Bracing arm for reinforcement of frames made from Beam Section TP F100 and/or Cantilever Bracket AK F100.

The Flange Clamp Fit SFK can be used for downpipes ranging from DN 100 to DN 150 thanks to its flexible adjustment options – one bracket for three sizes! Preferably used in combination with Pipe Clamp Stabil D-A or, if sound absorption is required, with Stabil D-A with Lining (see below). Adjustable in two horizontal directions, thus ensuring an exact and tension-free run of vertical pipes. In case SFK Brackets from pipe manufactures are used, rubber rings are added as insulation.

For safe interlocking connection of a Beam Bracket or an End Support STA to other Beam Brackets TKO (adjustment as per grid with 25 or 50 mm).

Brass Anchors with metric thread which have a gentle cone and a milled surface. They guarantee high holding forces, are safe against rotation and are anti-skidding. No need of special drills. Suitable for concrete, solid brick, natural stones, clinker brick, sand-lime bricks, solid wood and laminated timber. For fixing of channels, brackets, pipelines etc. Not suitable for humidors.

Clip for connecting cables up to a diameter of 16mm to PV mounting systems. Suitable to slot into the back of all Channels MS 41 with min. profile thickness of 2mm.

Recommended for single-armed wall suspension or fixing to other building structures.

Recommended for single-armed wall suspension or fixing to other building structures. Also available as a double version.

Recommended for single-armed wall suspension or fixing to other building structures.

Recommended for single-armed wall suspension or fixing to other building structures.

Recommended for single-armed wall suspension or fixing to other building structures. Also available as a double version.

Prefabricated single-arm cantilever installations to wall or other on-site structures.

Ready-to-use bracket for one-armed mounting to Sikla Channel MS 41.

Prefabricated single-arm cantilevers for the PRO 46 profile.

Galvanised hollow-box-section with welded end-plate to serve as cantilever arm. May be used as a crossbar when combined with End Support STA and 4 x Self Forming Screw FLS. By means of the round holes in the base plate a direct connection to excisting cast-in channels is possible.