Product catalogue

Using the Guiding Bracket FW F it's possible to guide Pipe Shoes with different plate thicknesses on siFramo F80 beam sections. Type L can guide the Pipe Shoe in the axial direction, but does not have any lift-off protection.

Using the Guiding Bracket FW F it's possible to guide Pipe Shoes with different plate thicknesses on siFramo F80 beam sections. The different versions of Type Z are suitable for the respective specified maximum plate thickness (t)and so additionally allow the absorption of lifting forces.

Element for modification of siMotec Sliding Pipe Shoes to Guided Pipe Shoes on siFramo F80 beam sections.

Using the Guiding Bracket FW, it's possible to guide Pipe Shoes with different plate thicknesses on siFramo F100 beam sections. Type L can guide the Pipe Shoe in the axial direction, but does not have any lift-off protection.

Using the Guiding Bracket FW F it's possible to guide Pipe Shoes with different plate thicknesses on siFramo F100 beam sections. The different versions of Type Z are suitable for the respective specified maximum plate thickness (t)and so additionally allow the absorption of lifting forces.

Element for modification of siMotec Sliding Pipe Shoes to Guided Pipe Shoes on siFramo F100 beam sections.

For suspension of a Guided Pipe Shoe from a siMotec Beam Section 100 resp. 120 or another steel girder with a flange width of 80 up to 120 mm.

Height adjustment unit for suspended pipelines and components, providing for accurate pipe laying and compensation of constructional building tolerances. Facilitates mounting and improves mounting efficiency on site.

Suitable for all M&E services. May be fixed directly to the ceiling (anchor) or in a suitable channel. Especially advantageous due to the suspension unit in the upper section of the height adjuster, since it enables the pipes to move in all directions.

Fastener for creating a screw connection in combination with a nut or an existing thread.

Fastener in HCP for creating a screw connection in combination with a nut or an existing thread.

Stainless steel fastener for creating a screw connection in combination with a nut or an existing thread.

Fast and efficient self-drilling screw for fastening thin-walled brackets to air ducts.

Channel Nut 27 for channels in stainless steel with a width of 27 mm.

For creating or securing a screw connection.

For creating or securing a screw connection.

For creating or securing a screw connection.

Connecting element with hexagonal drive for fastening connections to wood building materials.

Height-adjustable, double clamp pipe shoe with a delivery height of 150 mm. Height adjustment in steps of 2.5 mm. Particularly suitable for sliding pipe supports on suitable surfaces. When resting on steel beams, a minimum flange width of 80 mm is recommended. Guide or fixed points can also be created in combination with other Sikla components. These pipe shoes are designed for use in the temperature range 300°C to 500°C. The material-dependent correction values k are used for determining the loads at real operating temperatures. To reach the expected temperatures, according to DIN EN 13480-3, Table 13.11.2–2 must be considered for the substructure.

Height-adjustable, double-clamp pipe shoe with a delivery height of 200 mm. Height adjustment in steps of 2.5 mm. Particularly suitable for sliding pipe supports on suitable surfaces. When resting on steel beams, a minimum flange width of 80 mm is recommended. Guide or fixed points can also be created in combination with other Sikla components. These pipe shoes are designed for use in the temperature range 300°C to 500°C. The material-dependent correction values k are used for determining the loads at real operating temperatures. To reach the expected temperatures, according to DIN EN 13480-3, Table 13.11.2–2 must be considered for the substructure.

Height-adjustable, double-clamp pipe shoe with two bars and a delivery height of 150 mm. Height adjustment in steps of 2.5 mm. When resting on steel beams, a minimum flange width of 80 mm is recommended. These pipe shoes are designed for use in the temperature range 300°C to 500°C. The material-dependent correction values k are used for determining the loads at real operating temperatures. To reach the expected temperatures, according to DIN EN 13480-3, Table 13.11.2–2 must be considered for the substructure.

Height-adjustable, double-clamp pipe shoe with two bars and a delivery height of 200 mm. Height adjustment in steps of 2.5 mm. When resting on steel beams, a minimum flange width of 80 mm is recommended. These pipe shoes are designed for use in the temperature range 300°C to 500°C. The material-dependent correction values k are used for determining the loads at real operating temperatures. To reach the expected temperatures, according to DIN EN 13480-3, Table 13.11.2–2 must be considered for the substructure.

Suitable for Hole Saws LS 22 and LS 25. Can be fitted into all standard drills via hexagon holder.