Choose your country
Go to your local Sikla page and discover offers for your country or sales region:
Country
> 317 mm
Group: A767
Double-clamp, dual base Pipe Shoe, height-adjustment in steps of 2.5mm, delivery height of 200mm- suitable for sliding pipe supports
Designed for use in temperatures up to 500°C, with material-dependent correction factors for load determination in accordance with DIN EN 13480-3.
Suitable for steel beams, with a minimum flange width of 80 mm and flexible in combination with other Sikla components to create guide or fixed points.
To guarantee that both sliding plates rest correctly, both webs must be adjusted to exactly the same height.
| Type | Height H as delivered [mm] | Height H Range [mm] |
|---|---|---|
| HV 200 | 200 | 171 - 223,5 |
Tightening torque screw connections
| Clamping bolts | Tightening torque [Nm] | Height adjustment | Tightening torque [Nm] |
|---|---|---|---|
| DN 200 | 50 | Bolts in the bar | 80 |
| DN 250 - 600 | 60 | Bolts in the bar | 80 |
PDF (5.52 MB)
Height-adjustable, double-clamp pipe shoe with two bars and a delivery height of 200 mm. Height adjustment in steps of 2.5 mm. When resting on steel beams, a minimum flange width of 80 mm is recommended. These pipe shoes are designed for use in the temperature range 300°C to 500°C. The material-dependent correction values k are used for determining the loads at real operating temperatures. To reach the expected temperatures, according to DIN EN 13480-3, Table 13.11.2–2 must be considered for the substructure.
Certification
Max. temperature | 500 °C |
Pipe shoe static coefficient of friction u (without sliding plate) - siFramo and siMotec | 0,3 |
Salt spray test | Resistance > 500 hours |
Primary element material | steel |
Connecting element material | Torque/Nut Height adjustment: A4-80, Torque/Nut Pipe Clamp: A4-70 |
Surface finish | HCP |
Corrosion protection class | C4 |
Software
This product is available in the following software.
Info | Type | Size min. | Size max. | DN | Weight | Quantity | Part number | |
| LD-HT-HV 200 266-273 (DN 250_10'') | 266,00 mm | 273,00 mm | DN 250 (10") | 15,226 kg/pcs. | 1 pcs. | 801242 | ||
| LD-HT-HV 200 317-324 (DN 300_12'') | 317,00 mm | 324,00 mm | DN 300 (12") | 18,109 kg/pcs. | 1 pcs. | 801248 | ||
| LD-HT-HV 200 349-356 (DN 350_14'') | 349,00 mm | 356,00 mm | DN 350 (14") | 19,076 kg/pcs. | 1 pcs. | 801252 | ||
| LD-HT-HV 200 397-407 (DN 400_16'') | 397,00 mm | 407,00 mm | DN 400 (16") | 21,955 kg/pcs. | 1 pcs. | 801258 | ||
| LD-HT-HV 200 447-457 (DN 450_18'') | 447,00 mm | 457,00 mm | DN 450 (18") | 23,314 kg/pcs. | 1 pcs. | 801263 | ||
| LD-HT-HV 200 498-508 (DN 500_20'') | 498,00 mm | 508,00 mm | DN 500 (20") | 24,705 kg/pcs. | 1 pcs. | 801268 | ||
| LD-HT-HV 200 600-610 (DN 600_24'') | 600,00 mm | 610,00 mm | DN 600 (24") | 27,514 kg/pcs. | 1 pcs. | 801278 | ||