Together we build.
siklasicher.
Ducting Supports

Ducting Clamp PLU 2G-N with lining

Application

Two-piece pipe clamp for simple installation of spiral-seam ducts.

Suitable for soundproof installation according to DIN 4109.

Scope of delivery

Clamping bolts are pre-mounted and retained. Pivot screw for safe and simple assembly with quick-set clip, suitable for "single-hand" mounting. Easier handling and better storage possibilities due to optimized packaging.

Installation

Tighten upper part of the pipe clamp without the interfering lower part.
Hook lower part, provided with a keyhole, into the fixed clamping bolt (see picture).
After inserting the pipe and locating into the pivot screw, the clamping bolt head is located behind the angled profiles; then tighten clamping bolt with max. 2 Nm.

Technical Data

Type
Material
[mm]
Perm. load capacity
[kN]
Thread
connection
71 - 200 20 x 1.5 0.8 M8/M10
224 - 500 25 x 1.5 1.0 M8/M10

Material:
Steel, galvanised
Insulation insert:
SBR/EPDM black (rubber Profile - see chapter Sound Absorption Products)
Temperature range:
-50°C up to +110°C
TypeW
[kg]
Quantity
[pack]
Part
number
710.1150 199824
800.1250 199831
900.1350 199848
1000.15100 199855
1120.16100 199862
1250.17100 199879
1400.1970 199886
1500.2070 199893
1600.2170 199909
1800.2350 199916
2000.2550 199923
2240.4650 199930
2500.5140 199947
2800.5640 199954
3000.5940 199961
3150.6240 199978
3550.7040 199985
4000.8630 199992
4500.8720 199993
5000.9620 199994