DN 65 - 300

DN 15 - 50

Guided Support FR - H 20 HCP

Group: A740

Guided support for attachment of steel or stainless steel pipes DN 15 to DN 300 on steel beams

Suitable for beam widths of 80 to 300 mm and max. flange thickness of 20 mm

Assembly design changes from DN 65 onwards

Select a Type

Overview of Types
General Information
Installation

Overview of Types

General Information

Guided Support for attachment of steel or stainless steel pipes of DN 15 up to DN 300 on steel beams with width of 80 up to 300 mm and max. flange thickness of 20 mm. From DN 65 onwards, the design of the assembly changes.

Certification

Technical specifications

Max. temperature	130 °C
Min. temperature	-20 °C

Halogen-free

Yes

Material base body	steel
Material insulation body	PA
Material sliding element	PA GF
Surface	HCP
Corossion class	C4

Software

This product is available in the following software.

Installation

Position the preassembled clamping hooks onto the beam flange and tighten the nuts (to 10 Nm).
DN 15 - 50: For beam width < 100mm both nuts of the PA bearing block in the middle have to be removed. Fasten U-bolt to U-Bolt fixing plate by means of the included nuts (to 15 Nm) The pipe slides directly on the PA bearing blocks. Axial guiding of the pipe is ensured by the U-bolt.
DN 65 - 300: For beam width < 100mm the 4 nuts of the PA bearing block have to be removed. Fasten U-bolt to the clamping hooks with the included nuts (to 15 Nm). The pipe slides directly on the PA bearing block. Axial guiding of the pipe is ensured by the U-bolt.

Selection guide:

Type	for flange width [mm]
80/120	80 - 120
140/160	121 - 160
180/220	161 - 220
240/260	221 - 260
280/300	261 - 300