DN 65 - 300
Guided Support FR - H 20 DN 300 (12'') - 180/220 HCP
Group: A740
Part number 113741
Guided support for attachment of steel or stainless steel pipes DN 15 to DN 300 on steel beams
Suitable for beam widths of 80 to 300 mm and max. flange thickness of 20 mm
Assembly design changes from DN 65 onwards
Technical Data
Preassembled Guided Support including contact corrosion protection by means of a U-bolt sheath and PA slide bearing blocks. U-bolt with welded-on semi-washers and 2 hexagon nuts to secure position.
Guided Support set contains:
4 clamping hooks
1 slide bar
2 connecting rods M10
8 nuts M10
Technical specifications
Max. temperature | 130 °C |
Min. temperature | -20 °C |
Halogen-free | Yes |
Material base body | steel |
Material insulation body | PA |
Material sliding element | PA GF |
Surface | HCP |
Corossion class | C4 |
Certification
Installation
Position the preassembled clamping hooks onto the beam flange and tighten the nuts (to 10 Nm).
DN 15 - 50: For beam width < 100mm both nuts of the PA bearing block in the middle have to be removed. Fasten U-bolt to U-Bolt fixing plate by means of the included nuts (to 15 Nm) The pipe slides directly on the PA bearing blocks. Axial guiding of the pipe is ensured by the U-bolt.
DN 65 - 300: For beam width < 100mm the 4 nuts of the PA bearing block have to be removed. Fasten U-bolt to the clamping hooks with the included nuts (to 15 Nm). The pipe slides directly on the PA bearing block. Axial guiding of the pipe is ensured by the U-bolt.
Selection guide:
| Type | for flange width [mm] |
|---|---|
| 80/120 | 80 - 120 |
| 140/160 | 121 - 160 |
| 180/220 | 161 - 220 |
| 240/260 | 221 - 260 |
| 280/300 | 261 - 300 |