STA F 80-E
STA F 80/30 - 80-E
End Support STA-E F 80-E HCP
Group: A422
Plug-in component designed to create an endplate at the open end of a Beam Section TP F80 or a Cantilever Bracket AK F80
Round holes in the base plate allow direct connection to existing cast-in channels
Overview of Types
General Information
Plug-in component designed to create an endplate at the open end of a Beam Section TP F80 or a Cantilever bracket AK F80. By means of the round holes in the base plate a direct connection to excisting cast-in channels is possible.
Certification
CE mark (Declaration of performance see downloads)
ETA-24/0471
Technical specifications
Material base body | steel |
Surface | HCP |
Corossion class | C4 |
Load range
Type | -VX,perm. | VX,perm. | -VY,perm. | VY,perm. | VZ,perm. |
STA-E F 80/30-F 80 HCP | 9,00 kN | 9,00 kN | 9,40 kN | 9,40 kN | 8,20 kN |
STA-E F 80 HCP | 17,00 kN | 17,00 kN | 9,10 kN | 9,10 kN | 31,30 kN |
Type | -MX,perm. | MX,perm. | MY,perm. | -MZ,perm. | MZ,perm. |
STA-E F 80/30-F 80 HCP | 0,5 kNm | 0,5 kNm | 0,10 kNm | 0,5 kNm | 0,5 kNm |
STA-E F 80 HCP | 2,1 kNm | 2,1 kNm | 2,30 kNm | 0,8 kNm | 0,8 kNm |
Also available with DUALSHIELD for high corrosion protection within C5H environments.
Software
This product is available in the following software.
Installation
Type STA F 80-E:
Depending on the version, following mountings solutions are possible:
a) With 2x4 Self Forming Screws FLS when used to connect 2 Beam Sections.
b) With 4 Self Forming Screws FLS applied to the octagonal insert and 2 suitable wall anchors/fixings when connected to the building structure.
The Beam Section TP F 80/80 connected to the End Support STA F 80 has to be screwed with 4 Self Forming Screws FLS F. On each of the opposite sides 2 Self Forming Screws FLS F are necessary.
Configuration: Base plate welded to octagonal element F 80
Type STA F 80/30-E:
The Beam Section TP F 80/30 E connected to the End Support STA F 80/30 E has to be screwed with 2 Self Forming Screws FLS F.
Documents
- siFramo - ETA-24/0471
PDF (2.15MB)
- Static Guideline - siMotec
PDF (8.58MB)