STA F 80/30 - 80-E
End Support STA-E F 80/30-F 80 HCP
Group: A422
Part number 113066
Plug-in component designed to create an endplate at the open end of a Beam Section TP F80 or a Cantilever Bracket AK F80
Round holes in the base plate allow direct connection to existing cast-in channels
Technical Data
BP | 80 mm |
HP | 80 mm |
LG | 178 mm |
tP | 8 mm |
Load range
-VX,perm. | 9,00 kN |
VX,perm. | 9,00 kN |
-VY,perm. | 9,40 kN |
VY,perm. | 9,40 kN |
VZ,perm. | 8,20 kN |
-MX,perm. | 0,5 kNm |
MX,perm. | 0,5 kNm |
MY,perm. | 0,10 kNm |
-MZ,perm. | 0,5 kNm |
MZ,perm. | 0,5 kNm |
Technical specifications
Material base body | steel |
Surface | HCP |
Corossion class | C4 |
Also available with DUALSHIELD for high corrosion protection within C5H environments.
Certification
CE mark (Declaration of performance see downloads)
ETA-24/0471
Installation
Type STA F 80-E:
Depending on the version, following mountings solutions are possible:
a) With 2x4 Self Forming Screws FLS when used to connect 2 Beam Sections.
b) With 4 Self Forming Screws FLS applied to the octagonal insert and 2 suitable wall anchors/fixings when connected to the building structure.
The Beam Section TP F 80/80 connected to the End Support STA F 80 has to be screwed with 4 Self Forming Screws FLS F. On each of the opposite sides 2 Self Forming Screws FLS F are necessary.
Configuration: Base plate welded to octagonal element F 80
Type STA F 80/30-E:
The Beam Section TP F 80/30 E connected to the End Support STA F 80/30 E has to be screwed with 2 Self Forming Screws FLS F.
Documents
- siFramo - ETA-24/0471
PDF (2.15MB)
- Static Guideline - siMotec
PDF (8.58MB)