TCS 2 M12/M12
Beam Clamp TCS 2 M12/M16
Group: 1337
Part number 174215
Solid connection element for secure mounting of pipes, ducts, and devices on steel profiles such as I-beams, T-beams, U-beams, and angle beams.
Flexible alignment even on inclined beams when combined with the universal joint – for vertical installations.
Versatile use as a single fastener or for mounting crossbars and cantilevered structures.
Technical Data
B | 25 mm |
L | 58 mm |
L2 | 29 mm |
H1 | 27,3 mm |
Ma | M12 |
Mi1 | M12 |
Mi2 | M16 |
Load range
-VX,perm. | 5,37 kN |
VX,perm. | 5,37 kN |
VY,perm. | 4,51 kN |
-VZ,perm. | 8,50 kN |
Technical specifications
Material base body | cast steel |
Material connecting element | steel |
Class | 8.8 |
Surface | electro galvanized (Fe//Zn) |
Corossion class | C2 |
Certification
Installation
Tighten the clamping bolt of the Beam Clamp first by hand, then tighten down with a spanner according to the mounting structures. The hardened point of the clamping bolt will penetrate the comparatively soft material of the beam, ensuring a solid and highly secure connection. Tighten the locking nut for securing the installation.
Note: Respect relevant mounting instructions! For FM-construction use thread ≥ M10 only!