Product catalogue

Plastic anchor consisting of a sleeve and expansion area for installtion in concrete or masonry. Screwing in the fastener presses the wall firmly against the drill hole.

For dimensionless suspension without special requirements. The plastic-coated version is also suitable for copper tubes.

Perforated sleeve to be used in perforated brick in combination with Anchor Rods VMU. The version VM-SH is equipped with a convenient arrester clack, avoiding a slipping into the drill hole. For larger anchoring depths, the metal sleeves VM-SH are available.

For simultaneously punching two holes of ø 10.5 mm into trapezoidal corrugated roofing of a maximum thickness of 1.2 mm, providing for the subsequent mounting of a Sikla Roof Hanger. The optimised transformation allows already with very less strength a high cutting force at the hole punches. Thus several successively piercings or piercings in thicker sheets are possible without problems. Further advantages are: Continous adjustment of the cutting width for application of various profiles from 40 - 100 mm . Continous adjustment of the height position for an exact and uniform alignment of the hole positions taken from the lower edge of the trapezoidal corrugated sheet. After piercing, ejector springs ensure a safe return stroke of the hole punches.

Tool for safely tightening the Sound Absorber SDE.

Two-piece pipe clamp with double thread connection (M8/M10) and sound absorption lining for the installation of pipelines. Applicable for sound-absorbed installations according to DIN 4109 specifications.

Two-piece pipe clamp with double threaded nut (M8/M10) for installing pipe systems for M&E services. For soundproof ceiling, floor and wall installations. With time-saving quick-set clip. From 4' on, or when higher static loads occur, or under reversed bending stress, we recommend the use of a Stabil Pipe Clamp with lining.

Two-piece pipe clamp with double thread nut (M8/M10) for installing pipe systems for M&E services. Suitable for soundproof installation of pipes made of plastic, copper, steel (also stainless steel), mainly for high temperatures. With a time-saving quick-set clip. From 3' on, or when higher static loads occur, or under reversed bending stress, we recommend the use of a Stabil pipe clamp with silicone lining.

Suitable for installing pipe systems required for all M&E services. For connection options without adapter, see drawing. With Adapter: M12, M16, R 1/2', R 3/4', R 1'. Designed for soundproof ceiling, floor and wall mounting also for the sound insulation requirements according DIN 4109. With sticked interlocking lining, which prevents from accidental loss of lining and allows easy turning and slipping of the pipe during assembly.

For the installation of pipes required for all M&E services in industrial, residential and public buildings.

For the installation of pipes required for all M&E services in industrial, residential and public buildings. Connection options without adapter, see drawing. With adapter: M12, M16, R 1/2', R 3/4', R 1'. Suitable for ceiling, floor and wall mounting.

For soundproof installation of pipes required for all M&E services in industrial, residential and public buildings (as per DIN 4109). Connection options without adapter, see drawing. With adapter: M12, M16, R 1/2', R 3/4', R 1'. Suitable for ceiling, floor and wall mounting.

For the installation of pipes required for all M&E services in industrial, residential and public buildings. Particularly suitable for soundproof pipe installation according to DIN 4109. Connection options without adapter, see drawing. With adapter: M12, M16, R 1/2', R 3/4', R 1'. Suitable for ceiling, floor and wall mounting.

For the installation of pipes required for all M&E services in industrial, residential and public buildings.

For the installation of pipes required for all M&E services in industrial, residential and public buildings.

For the installation of pipes required for all M&E services in industrial, residential and public buildings. Particularly suitable for soundproof pipe installation according to DIN 4109.

For soundproof installation of pipes required for all M&E services in industrial, residential and public buildings (as per DIN 4109). Suitable for ceiling, floor and wall mounting. The form-fitting rubber profile is additionally glued in place, making it completely secure and allowing the pipe to be rotated and slid without any problems during installation, without the rubber becoming jammed.

For soundproof installation of pipes required for all M&E services in industrial, residential and public buildings (as per DIN 4109). Suitable for ceiling, floor and wall mounting.

For installation of pipes required for all M&E services in industrial, residential and public buildings. In combination with Triple Thread Connector NT 3G the suspension of pipe clamps up to dia. 303 mm is possible.

Effective solution for structured sound decoupling, also in combination with the Flange Clamp Fit SFK for sound insulation requirements.

For installation of pipes required for M&E services and in plant construction.

For soundproof installation of pipes in M&E services and plant construction.

For soundproof installation of pipes in M&E services and plant construction (as per DIN 4109).

Industrial pipe clamp following VGB-R 510 L for standard industrial pipe supports. The pipe clamp Stabil Form C LK can be used as pendulum suspension or as part of a rod hanger.