Pipe Clamp RATIO LS
Group: 1245
Two-piece pipe clamp with double-thread nut for M8 and M10 connections
Suitable for wall, floor and ceiling mounting as well as sound-absorbed installations according to DIN 4109 specifications
Overview of Types
General Information
Two-piece pipe clamp with double threaded nut (M8/M10) for installing pipe systems for M&E services. For soundproof ceiling, floor and wall installations. With time-saving quick-set clip. From 4' on, or when higher static loads occur, or under reversed bending stress, we recommend the use of a Stabil Pipe Clamp with lining.
Certification
This product has been awarded the RAL quality marks "pipe supports" and "fire-tested pipe supports" and is subject to continuous external monitoring according to RAL GZ-655.
Technical specifications
Insertion Isolation | 17 dB(A) |
Material base body | steel |
Material insulation body | SBR/EPDM |
Material connecting element | steel |
Surface | electro galvanized (Fe//Zn) |
Corossion class | C2 |
Load range
Type | -VZ,perm. |
RATIO LS 12 - 20 | 0,60 kN |
RATIO LS 21 - 27 | 0,60 kN |
RATIO LS 28 - 35 | 0,60 kN |
RATIO LS 38 - 45 | 0,60 kN |
RATIO LS 48 - 56 | 0,60 kN |
RATIO LS 57 - 63 | 0,60 kN |
RATIO LS 64 - 71 | 0,60 kN |
RATIO LS 74 - 84 | 0,60 kN |
RATIO LS 83 - 90 | 0,95 kN |
RATIO LS 108 -114 | 1,15 kN |
The recommended load is calculated using specific statistical methods relating to break load and is designed to restrict deflection to 1.5 mm or 2 % of the maximum applicable clamping diameter.
Fire resistance
Type | FRP 30 | FRP 60 | FRP 90 | FRP 120 |
RATIO LS 12 - 20 | 0,22 kN | 0,1 kN | 0,06 kN | 0,03 kN |
RATIO LS 21 - 27 | 0,22 kN | 0,1 kN | 0,06 kN | 0,03 kN |
RATIO LS 28 - 35 | 0,22 kN | 0,1 kN | 0,06 kN | 0,03 kN |
RATIO LS 38 - 45 | 0,22 kN | 0,1 kN | 0,06 kN | 0,03 kN |
RATIO LS 48 - 56 | 0,22 kN | 0,1 kN | 0,06 kN | 0,03 kN |
RATIO LS 57 - 63 | 0,22 kN | 0,1 kN | 0,06 kN | 0,03 kN |
RATIO LS 64 - 71 | 0,22 kN | 0,1 kN | 0,06 kN | 0,03 kN |
RATIO LS 74 - 84 | 0,22 kN | 0,1 kN | 0,06 kN | 0,03 kN |
RATIO LS 83 - 90 | 0,39 kN | 0,21 kN | 0,13 kN | 0,08 kN |
RATIO LS 108 -114 | 0,54 kN | 0,27 kN | 0,17 kN | 0,12 kN |
Software
This product is available in the following software.
Installation
After pressing together both parts of the clamp, the clamping bolt head must be located behind the angled profiles; then tighten clamping bolt (2 Nm).
Documents
- Pipe Clamp Ratio LS – RAL-GZ 655
PDF (0.28MB)
- Pipe Clamp Ratio LS – RAL-GZ 656
PDF (0.65MB)