Pipe Clamp RATIO LS SIL
Group: 1244
Two-piece pipe clamp with double-thread nut for M8 and M10 connections
Suitable for wall, floor and ceiling mounting as well as sound-absorbed installations according to DIN 4109 specifications, also for high temperatures
Overview of Types
General Information
Two-piece pipe clamp with double thread nut (M8/M10) for installing pipe systems for M&E services. Suitable for soundproof installation of pipes made of plastic, copper, steel (also stainless steel), mainly for high temperatures. With a time-saving quick-set clip. From 3' on, or when higher static loads occur, or under reversed bending stress, we recommend the use of a Stabil pipe clamp with silicone lining.
Certification
This product is has obtained the "RAL Gütezeichen Rohrbefestigung" and is subject to external surveillance according to RAL GZ-655.
Technical specifications
Insertion Isolation | 16 dB(A) |
Material base body | steel |
Material insulation body | silicone |
Material connecting element | steel |
Attachments | Return spring made of spring steel sheet |
Surface | electro galvanized (Fe//Zn) |
Corossion class | C2 |
Load range
Type | -VZ,perm. |
RATIO LS SIL. 12 - 20 | 0,60 kN |
RATIO LS SIL. 21 - 27 | 0,60 kN |
RATIO LS SIL. 28 - 35 | 0,60 kN |
RATIO LS SIL. 38 - 45 | 0,60 kN |
RATIO LS SIL. 48 - 56 | 0,60 kN |
RATIO LS SIL. 57 - 63 | 0,60 kN |
RATIO LS SIL. 64 - 71 | 0,60 kN |
RATIO LS SIL. 74 - 84 | 0,60 kN |
RATIO LS SIL. 83 - 90 | 0,95 kN |
The recommended load is calculated using specific statistical methods relating to break load and is designed to restrict deflection to 1.5 mm or 2 % of the maximum applicable clamping diameter.
Software
This product is available in the following software.
Installation
After pressing together both parts of the clamp, the clamping bolt head must be located behind the angled profiles; then tighten clamping bolt (2 Nm).
Documents
- Pipe Clamp Ratio LS – RAL-GZ 655
PDF (0.28MB)