Type 1
Sound Absorber SDE 1
Group: 1612
Sound absorption element with M10, M12 or triple thread connection options, compliant with DIN 4109
Suitable for overhead, floor and wall mounting in plant construction
Overview of Types
General Information
Various applicable sound absorption element with M10, M12 or triple thread connection options (also according to DIN 4109). Suitable for overhead, floor and wall mounting purposes in the plant construction.
Certification
Technical specifications
Max. temperature | 110 °C |
Min. temperature | -50 °C |
Insertion Isolation | 18,9 dB(A) |
Hardness | 45+/-5° Shore |
Material base body | steel |
Material insulation body | EPDM |
Surface | electro galvanized (Fe//Zn) |
Corossion class | C2 |
Load range
Type | VY,perm. | -VZ,perm. | VZ,perm. |
SDE 1 - M10 | 0,50 kN | 2,50 kN | 3,00 kN |
SDE 1 -3G | 0,50 kN | 2,50 kN | 3,00 kN |
Software
This product is available in the following software.
Installation
The grub screw has to be screwed as much as possible into the thread for connection to the building structure using an anchor with an internal thread.
Tighten the Sound Absorber with Pin Spanner SDE.
Note: When implementing wall mounting solutions, high bending moments should be avoided, e.g. by arranging a Channel section or a Support Bracket onto several Sound Absorbers.