Roof Hanger TRH MS

Group: 1428

Part number 151564

Mounting of pipes with low loads (DN 50) to trapezoidal sheet metal ceilings

For heavier loads, distribute evenly across several holders, e.g. using a crossbeam.

Technical Data
Installation

Technical Data

B₁	90 mm
B₂	26 mm
d	9,5 mm
d₁	4 mm
d₂	10,1 mm
H	90 mm
H₁	15 mm
t	2,5 mm

Completely pre-assembled (see drawings).

Load range

-V_Z,perm.

0,30 kN

Note: Working load per fixing point. The carrying capacity of the trapezoidal corrugated sheet may restrict the application.

Technical specifications

Material base body	steel
Surface	pre-galavanised
Corossion class	C2

Certification

Installation

For drilling trapezoidal corrugated sheets, we recommend to use the Piercing Tool LOT 3; for fixing, we recommend a M8x100 (Part No. 138608) cross bolt.

Note: Each through bolt is to be secured by means of a locking nut; the same applies to dynamic loads.

Blind steel rivets or sheet metal screws may not be used in Sprinkler Systems.