Resin Anchor Rod VMU-A 8X110
Group: 1409
Part number 110444
Anchor rod for pre-installation with Injection Systems VMU plus, VME plus and VMH
Suitable for anchoring in concrete tensile pressure zones or brickwork with adjustable embedment depth
Ideal for attaching pipelines, channels and brackets in closed rooms (except damp locations)
Technical Data
Pre-assembled with washer and hexagon nut.
Detailed technical information see respective injection systems.
Technical specifications
Material base body | steel |
Class | 5.8 |
Surface | electro galvanized (Fe//Zn) |
Corossion class | C2 |
Certification
Sikla Approval ETA-15/0270, ETA-17/0307
Approval ETA 17/0716, 19/0483
Installation
1. Drill hole according to min. setting depth vertically to the surface.
2. Careful cleaning of drill hole with Steel brush and Blow-Out Pump.
3. Screw Mixing Nozzle onto the cartridge; foreshots to be removed and fill 2/3 of drill hole with resin starting from botton of the hole.
4. Drive the anchor manually into plastered borehole up to its embedment mark.
5. When reaching the embedment mark, plaster must be apparent.
6. Respect hardening time, when tighten the anchor with instructed torque.
Image: h(ef) + t(fix) = usable length of the threaded rod (without nut and washer)
Detailed assembly instruction is attached to the product.
Documents
- Injection System VMU plus - ETA 17/0307
PDF (21.36MB)
- Injection System VMU plus - Fire resistance of concrete
PDF (5.14MB)
- Sikla Anchor Injection Systems
PDF (8.81MB)
- DoP - Injection System VMU plus Concrete
PDF (8.17MB)