Injection System VMZ 280
Group: 1409
Part number 501634
Resin for Resin Anchor Rod VMZ-A with excellent load capacity in cracked and uncracked concrete
Hardens to form a strong bond with concrete and an expansion sleeve around the conical rod; inner bond is released by applying torque after hardening
Approved for seismic action under performance categories C1 and C2 (M10–M16)
Technical Data
Technical specifications
Material base body | Vinyl ester basis, styrene-free |
Corossion class | C2 |
Certification
Detailed technical information could be seen in the data sheets of Resin Anchor Rod VMZ, as well as in the Approval ETA-10/0260.
Sikla Approval ETA-10/0260
Installation
Resin and hardener are separated in the cartridge. A dispensing tool is used to push both components through a mixing nozzle. In the nozzle the resin and hardener are mixed and filled into the the cleaned drill hole.
After a longer break in work, exchange of the mixing nozzle allows further use of the resin.
Reach of resin:
| Type | Number of drill holes per cartridge |
|---|---|
| VMZ-A M8 ... | 58 |
| VMZ-A M10 ... | 39 |
| VMZ-A M12 ... | 27 |
| VMZ-A M16 ... | 16 |
Documents
- Injection System VMZ - ETA 10/0260
PDF (6.64MB)
- Sikla Anchor Injection Systems
PDF (8.81MB)
- VMZ – Safety Data Sheet
PDF (0.29MB)
- DoP - Injection System VMZ
PDF (8.42MB)