Fixed Point Clamp FS (10'') 274
Group: 1380
Part number 160140
For fixed point installations in combination with mounting kits
Absorbs axial loads in both directions thanks to symmetric construction
Mounting kit and braces required; dimensioning advice available for loads up to 35 kN
Technical Data
B1 | 379 mm |
b1 | 100 mm |
D | 273 mm |
D1 | 273 mm |
d | 17 mm |
e | 331 mm |
H | 299,8 mm |
Mi1 | M16 |
SA | AF24 |
SG | M16 |
SL | 60 mm |
t | 6 mm |
Complete with 4 clamping bolts and 4 nuts M16, from size 108 mm onwards with spring inserts.
Clamping bolts, nuts and spring inserts are pre-assembled and secured against falling out.
Technical specifications
Material base body | steel |
Material connecting element | steel |
Surface | electro galvanized (Fe//Zn) |
Corossion class | C2 |
Certification
Installation
Tighten clamping bolts equally with the torque M as mentioned in the table.
Note: Tightening torque for combination FP clamp with steel pipe DIN EN 10220 / normal wall thickness. For pipes with smaller wall thickness or other material, the values have to be reduced.
| Type | Tightening torque |
|---|---|
| 21,3 ... 48,3 | 50 Nm |
| 57 mm ... 88,9 | 80 Nm |
| 108 mm ... 521 mm | 100 Nm |