Clamping Unit KL 1
Group: 1357
Part number 118055
Used for assembling double channels made from Sikla Channels with slot pattern III or IV (minimum material thickness 2.0 mm)
Suitable for pre-assembly in a workshop; torque wrench required to achieve specified static values
Static values guaranteed only when using Sikla Channels
Technical Data
Consists of forming plate, pressure plate and a hexagon socket bolt M8 (DIN 7991)
Attention: These values are only guaranteed when using Sikla Channels.
Technical specifications
Material base body | cast steel |
Material connecting element | steel |
Surface | electro galvanized (Fe//Zn) |
Corossion class | C2 |
Installation
Max. spacing between connecting points is 500 mm, with one point at each end of the channel section.
Required number of Clamping Units: channel 2m = 5 pcs., channel 6m = 13 pcs.
For Channel 41/21/2,0 no connecting elements, like channels nuts, etc. could be placed directly above the connectors.
Torque: M = 25 Nm
Suitable for Sikla Channels: 41/21/2.0 to 41-75/75/3.0