Clamping Ends SKL

Group: 1350

Part number 145671

Mounting element fixed within the flanges of I- and U-shaped beams for systems running parallel or at right angles to the beam

Also suitable as a support for crossbars between two vertically opposed profiles

Technical Data

Pre-assembled

-V_X,perm.	2,50 kN
V_X,perm.	2,50 kN

The maximal torsional moment of the channel is to be taken into consideration.

Material base body	steel
Material connecting element	steel
Surface	electro galvanized (Fe//Zn)
Corossion class	C2

Certification

The tightening moment of the clamping bolts must be between 1 (minimum) and 1 1/2 (maximum) turns; then tighten locking nuts.

Note: The length of the channel to be cut : inside diameter of beam less 25 mm

Suitable for Sikla Channels: 41/41/2.5 and 41/45/2.5