Channel MS 41/21/1,5 6M

If required, channels can be joined on site using:

Slot pattern II: Hexagon socket bolt M8 x 16, with a max. spacing of 250 mm between connecting points one point at each end.

Slot pattern III and IV: Clamping Unit KL (for details see product.

All Channels MS 41 are serrated on the inner edges and thus can be combined with many other Sikla products, e.g. Channel Nut, End Support WBD, Beam Clamp TCS 1. Particularly effective combinations are possible using other Pressix components. All types can be used as guide and support channels by inserting Slide Block 41 inside the channel.