Choose your country
Go to your local Sikla page and discover offers for your country or sales region:
Country
Group: 1408
Part number 114147
Anchor for push-through mounting in concrete tensile zones for M&E services and plant construction
High permissible loads with close edge and centre distances, suitable for cracked and non-cracked concrete
Simple and quick installation with matching drill diameter and drive-in hammer zone to protect threads
Supplied with washer and hexagon nut.
Primary element material | steel |
Surface finish | electro galvanized (Fe//Zn) |
Corrosion protection class | C2 |
Certification
Sikla Approval ETA-10/0259
FM-Approval for M10, M12, M16 only for Standard anchoring depth
VdS compliant for all sizes
Shock approval issued by the Federal Office for Civil Defence, Bern (Switzerland)
1. Drill bore hole according to the minimum bore hole depth perpendicularly to the surface.
2. Remove dirt from hole.
3. Drive the anchor into concrete up to its embedment mark.
4. Immediately resilient after tightening with the torque wrench T _inst indicated in the table below. Advices of the mounting instruction are to be respected!
Bolt Anchor AN BZ plus - ETA 10/0259
PDF (5.36 MB)
FM Approval - Sikla Anchors AN
PDF (217 KB)
VdS Approval - Sikla Anchors – Types AN, BZ, TSM (DN 0–100)
PDF (233 KB)
Sikla Metal Anchor Systems
PDF (4.09 MB)
Bolt Anchor AN BZ plus - Technical Data
PDF (71.8 KB)
DoP - Bolt Anchor AN BZ PLUS
PDF (2.47 MB)