Assembly Set MS 5P M16 S A4
Group: 1778
Part number 803710
Element for connecting Beam Bracket TKO, Angled Beam Bracket SKO, End Support WBD or Pivot Joint GE F to a beam section
Technical Data
b | 17 mm |
d | 17 mm |
4 Beam Clips M16
4 Support plates M16
4 ss trimming M16 x 100
ss trimming consisting of: Hexagon bolt M16, 1 washers, 1 hexagon nut (polymer-lubricated)
Load range
-VY,perm. | 19,80 kN |
VY,perm. | 19,80 kN |
-VZ,perm. | 8,40 kN |
VZ,perm. | 8,40 kN |
The specified F(z) data relate to the worst case with flange thicknesses 30 mnm (M12) or 40 mm (M16) as well as a coefficient of adhesion µ(adhesion) = 0,20.
A possibly operating tensile force F(y) isn't included.
Technical specifications
Material base body | Stainless Steel A4 |
Corossion class | CRC II – III (C4 – C5 acc. to DIN EN ISO 12944-2) |
Installation
1. Position Beam Clip with the split end on beam section.
2. Install support plate and ss trimming and tighten accordingly.
The support plate secures a rectangular assembly of the bolt and prevents its shifting or bending stress. In conjunction with the ss trimming a continuous and predictable preload force is guaranteed.
Tightening torques:
| Type | Size range [mm] | Tightening torque MA [Nm] / plus revolution |
|---|---|---|
| M12 S | 1 - 30 | 60 / 90° |
| M16 S | 4 - 40 | 140 / 90° |