Product catalogue

To be used with Channels MS 41 HCP.

To be used with Channels MS 41 HCP.

Used in combination with profiled beams as a holder for mounting crossbars composed of Sikla Channels or other standard profiles.

The threaded rod according to DIN 976 serves as a versatile connecting element for fastening and mounting in technical building equipment and plant engineering. It allows for flexible length adjustments and is often used in combination with pipe clamps, brackets or support systems.

The threaded rod according to DIN 976, HCP coated, serves as a versatile connecting element for fastening and mounting in technical building equipment and plant engineering. It allows for flexible length adjustments and is often used in combination with pipe clamps, brackets or support systems. The HCP version is suitable for special corrosion protection requirements.

The threaded rod according to DIN 976 serves as a versatile connecting element for fastening and mounting in technical building equipment and plant engineering. It allows for flexible length adjustments and is often used in combination with pipe clamps, brackets or support systems. Made of stainless steel, making it suitable for special corrosion protection requirements.

To be used as a direct connection element between Mounting Plate and Pipe Clamp or a support rod in combination with Socket Angle or Universal Joints as angular support.

To be used as a direct connecting element between Mounting Plate ss and stainless steel pipe clamp or as a support rod in combination with Universal Joints.

To be used as a direct connecting element between Mounting Plate ss and stainless steel pipe clamp or as a support rod in combination with Universal Joints.

Necessary and time-saving element for horizontal or vertical constructions on the site. To be used as support and bracing of cantilever brackets or channel constructions.

Tie Rods cater for the lateral forces applied to Support Brackets. Such lateral forces always occur when pipes are laid, in particular when sliding elements are fixed onto Support Brackets, and fett must /fett be safely absorbed by means of Tie Rods fixed to the brackets. Otherwise the Support Brackets run the accute risk of being pulled out of their anchoring components by the forces exerted.

For fixing pipes up to a nominal diameter of NB50 directly to ceilings made of trapezoidal corrugated sheet according to VdS/FM standards or as single point mounting solution. In cases where VdS or FM regulations are not applicable or in cases of ventilation systems, larger loads may be fixed via crossbars and by an appropriate number of toggle studs. By turning the threaded rod, it is possible to make height adjustments. This threaded rod is secured and cannot be unscrewed completely. The Hypalon washer is weather-resistant and thus a crucial safety factor when sealing the mounting bore.

Flange screw with perfectly aligned properties for the constructional timber work, available in diameters 8 and 10 mm. Simple handling is secured due to ideal load transmission. The head dia. of type M8 is aligned to the slots of Channel 41. Thus for direct assembly through the elongated hole of the channel, a good load bearing capacity is secured. Type M10 can also be used at the edge of the channel for direct assembly into the elongated holes. The cutting notch allows direct screwing in without pre-drilling and allows a pinpoint locating. In addition, the tip avoids reliably the splitting of the battens behind. The high bearing of loads given by the flat head reduces the necessary fixing points. Especially for the fixing of roof hooks, an economical handling is assured.

The ABL HT spray is used to repair or embellish small areas of Sikla High-Temperature (HT) pipe shoe. It is a fast-drying, highly opaque special paint with excellent adhesion.

U Bolt Fastening to connect standard U-Bolts required for pipework to the supporting Beam Sections, Cantilever Brackets and Beam Brackets F80 or F100.

For pipeline systems in industrial and residential buildings and sprinkler installations meeting the VdS standards. For horizontal and vertical pipelines, the U-Bolts are applied as Fixed Points and as Guiding Supports. U-Bolt also available in accordance with DIN 3570.

U Bolt RUB 46 for fastening pipes in utility systems to the Profile PRO 46. U Bolts are used as a fixed point or as a guide for horizontal and vertical pipes.

For pipeline systems in industrial and residential buildings and Sprinkler installations meeting the VdS and FM standards. For horizontal and vertical pipelines, the U-Bolts are applied as Fixed Points and as Guiding Supports.

For pipeline systems in industrial and residential buildings and Sprinkler installations according to VdS and FM standards. For horizontal and vertical pipelines, the U-Bolts are applied as Fixed Points and as Guiding Supports.

For simple combination of U Bolt and Channel. Suitable for all Sikla Channels MS 41.

For mounting pipes directly on a support, especially suitable as a replacement for U Bolts in connection with channels or cantilever brackets. When using T Bolts, their washer can be used in between the channel and the U Clamp. Dimensions and cross-sections are in keeping with the VdS standard.

Guided Support for the installation of siFramo Beam Sections, Channels 41 and steel girders (H-, I- and Double-U) to support overlying pipelines. This U Clamp can be used as an alternative for Non-Grip (Guide) U Bolt applications. The sliding plate reduces friction between pipe and substructure. The plastic layer and the sliding plate ensure a galvanic isolation between pipe and U Clamp as well as substructure, so it's possible to fasten e.g. stainless steel pipes.

Connecting element to fix Channel MS 27 to beam- and girder structures. Fixing to the channel regardless the orientation of channel opening or slotted side .

Clamping element for bi-lateral attachment of crossbars to steel beams, independent from the channel's opening.