Torx Flat Head Coach Screw FLAH
Group: 1369
Flange screw for constructional timber work, available in diameters 8 mm and 10 mm, ensuring simple handling via ideal load transmission
M8 head diameter aligned to Channel 41 slots for direct assembly through elongated holes; M10 usable at the channel edge for direct assembly into elongated holes
Cutting notch enables direct screwing without pre-drilling and precise positioning; tip prevents splitting of battens; flat head provides high load bearing and reduces fixing points, especially economical for roof hook fixing
Overview of Types
General Information
Flange screw with perfectly aligned properties for the constructional timber work, available in diameters 8 and 10 mm. Simple handling is secured due to ideal load transmission. The head dia. of type M8 is aligned to the slots of Channel 41. Thus for direct assembly through the elongated hole of the channel, a good load bearing capacity is secured. Type M10 can also be used at the edge of the channel for direct assembly into the elongated holes. The cutting notch allows direct screwing in without pre-drilling and allows a pinpoint locating. In addition, the tip avoids reliably the splitting of the battens behind. The high bearing of loads given by the flat head reduces the necessary fixing points. Especially for the fixing of roof hooks, an economical handling is assured.
Certification
Technical specifications
Material base body | steel |
Surface | electro galvanized (Fe//Zn) |
Corossion class | C2 |
Load range
Type | -VZ,perm. |
FLAH 8 X 40 | 3,54 kN |
FLAH 8 X 60 | 3,54 kN |
FLAH 8 X 80 | 3,69 kN |
FLAH 10 X 70 | 5,26 kN |
FLAH 10 X 100 | 5,26 kN |
Software
This product is available in the following software.
Installation
Screw tool: T 40