U Clamp RUC I HCP

Group: A023

Guided Support for installing siFramo Beam Sections, Channels 41 and steel girders to support pipelines

Alternative to Non-Grip U Bolt applications, with sliding plate reducing friction

Plastic layer and sliding plate provide galvanic isolation, enabling fastening of stainless steel pipes

Select a Type

Overview of Types

General Information

Guided Support for the installation of siFramo Beam Sections, Channels 41 and steel girders (H-, I- and Double-U) to support overlying pipelines. This U Clamp can be used as an alternative for Non-Grip (Guide) U Bolt applications. The sliding plate reduces friction between pipe and substructure. The plastic layer and the sliding plate ensure a galvanic isolation between pipe and U Clamp as well as substructure, so it's possible to fasten e.g. stainless steel pipes.

Technical specifications

Max. temperature	90 °C
Min. temperature	-20 °C

Primary element material	steel
Sliding element material	PA 6.0, POM
Surface finish	HCP
Corrosion protection class	C4

Load range

Type	-V_Y,perm.	V_Y,perm.	-V_Z,perm.	V_Z,perm.
RUC-I MP 22 HCP	0,60 kN	0,60 kN	2,30 kN	2,30 kN
RUC-I MP 28 HCP	0,60 kN	0,60 kN	2,30 kN	2,30 kN
RUC-I MP 35 HCP	0,60 kN	0,60 kN	2,30 kN	2,30 kN
RUC-I MP 43 HCP	0,60 kN	0,60 kN	2,30 kN	2,30 kN
RUC-I MP 49 HCP	0,60 kN	0,60 kN	2,30 kN	2,30 kN
RUC-I MP 62 HCP	0,60 kN	0,60 kN	2,30 kN	2,30 kN
RUC-I MP 77 HCP	0,60 kN	0,60 kN	2,30 kN	2,30 kN
RUC-I MP 90 HCP	0,60 kN	0,60 kN	2,30 kN	2,30 kN
RUC-I MP 116 HCP	0,60 kN	0,60 kN	2,30 kN	2,30 kN
RUC-I MP 141 HCP	0,20 kN	0,20 kN	0,80 kN	0,80 kN
RUC-I MP 170 HCP	0,20 kN	0,20 kN	0,80 kN	0,80 kN
RUC-I MP 221 HCP	0,20 kN	0,20 kN	0,80 kN	0,80 kN
RUC-I MP 275 HCP	0,20 kN	0,20 kN	0,80 kN	0,80 kN
RUC-I MP 325 HCP	0,20 kN	0,20 kN	0,80 kN	0,80 kN

The perm. loads have been determined by load tests following DIN EN 13480-3 annex J.
For the installation on top of steel girders and Channels 41 the load capacities of these substructures (and connection parts) have to be verified.

Also available with DualShield for high corrosion protection within C5H environments.

Software

This product is available in the following software.

Installation

Depending on the existing substructure the following options are possible:

a) On top of siFramo Beam Sections with Self Forming Screws FLS
b) On top of Channels 41 with bolts M10 and suitable Channel Nut
c) On top of steel girders (H-, I- and Double-U) with bolts M10