Choose your country
Go to your local Sikla page and discover offers for your country or sales region:
Country
Group: 1814
Part number 186284
Assembly aid for vertical rails or hard-to-reach places – effectively replaces a ‘third hand’.
Can be used universally in all Stainless steel Sikla mounting rails with a rail width of 41 mm – regardless of the rail height.
HCP coating meets special corrosion Protection requirements.
Mi1 | M10 |
Channel Nut and Spring are tightely connected.
VX,perm. | 3,40 kN |
-VZ,perm. | 5,80 kN |
The permissible load capacities of the channels are to be respected.
Primary element material | steel |
Connecting element material | Spring steel, stainless |
Class | 5.6 |
Surface finish | HCP |
Corrosion protection class | C4 |
After inserting the Speed Nut into the channel opening, it is turned to the right as far as it will go by exerting slight pressure on it; deinstallation may be effected by following the instructions on the reverse order.
Installation and deinstallation do not require tools and may be repeated several times.
| M6 | M8 | M10 | M12 | |
|---|---|---|---|---|
| Tightening torque 8.8 [Nm] | 10 | 25 | 40 | 80 |
Using lower steel classes, the value are to be reduced accordingly.
Certification
