Choose your country
Go to your local Sikla page and discover offers for your country or sales region:
Country
Group: 1714
Assembly aid for vertical rails or hard-to-reach places – effectively replaces a ‘third hand’.
Can be used universally in all Stainless steel Sikla mounting rails with a rail width of 41 mm – regardless of the rail height.
Smooth movement and secure fastening – no snagging on screw heads, no settling after tightening.
After inserting the Speed Nut into the channel opening, it is - by exerting slight pressure on it - turned to the right as far as it will go; deinstallation may be effected by following the instructions in reverse order.
Installation and deinstallation do not require tools and may be repeated several times.
| M6 | M8 | M10 | |
|---|---|---|---|
| Tightening torque [Nm] | 10 | 25 | 40 |
Info | Type | Weight | Quantity | Part number |
In particular useful when installing in vertical channels or in places of difficult access. Further advantages: for all Stainless steel Sikla Channels MS 41, independent of the height of the channel, no getting stuck on bolt heads when sliding in the channel, no appearance of settlement after tightening.
Certification
Primary element material | Stainless Steel A4 |
Connecting element material | Spring steel, stainless |
Corrosion protection class | CRC II – III (C4 – C5 acc. to DIN EN ISO 12944-2) |
Type | VX,perm. | -VZ,perm. |
NT CC41-M 6 A4 | 0,90 kN | 3,20 kN |
NT CC41-M 8 A4 | 2,10 kN | 5,80 kN |
NT CC41-M10 A4 | 3,40 kN | 5,80 kN |
The permissible load capacities of the channels are to be respected.
Software
This product is available in the following software.
