Slide Element GS 41
Group: 1336
Slide element for use in Sikla Channels MS 41 with single or double mounting options using a Tandem Connector
Compatible with Sikla Pipe Clamps Ratio S and Stabil D-3G; various connection options from M12 to R1' using mounting plates and bolts M10 x 20
Suitable for ceiling and floor mounting and as a guide for rising pipes; sliding distance determined by rail length
Overview of Types
General Information
Slide element for use in Sikla Channels MS 41. For single and, using a Tandem Connector, double mounting options. The sliding distance is determined by the length of the rail. Holding Brackets are to be used for securing the slide element. Alternatively, the Sikla Channel Holder SH may be used. Any option in combination with Sikla Pipe Clamps Ratio S and Stabil D-3G may be realised. Various connection options with pipe clamps in the range between M12 and R1'. For these connection options, the corresponding Mounting Plate could be screwed directly with the slide element by means of bolts M10 x 20. Suitable for ceiling and floor mounting solutions and as a guide for rising pipes.
Certification
Technical specifications
Sliding Friction μ | 0,14 |
Static Friction μ0 | 0,16 |
Material base body | steel |
Surface | electro galvanized (Fe//Zn) |
Corossion class | C2 |
Load range
Type | -VZ,perm. | VZ,perm. |
GS 41-M10 | 6,00 kN | 4,00 kN |
The permissible bending moment of the connection elements (threaded rod or threaded tube) may restrict the application!
Software
This product is available in the following software.
Installation
Lever arm L(max) for single mounting: 150 mm