Rubber Profile SAL EPDM sk
Group: 1294
Inlay for pipe clamps providing galvanic separation to prevent contact corrosion
Overview of Types
General Information
Inlay for pipe clamps for galvanic separation (prevention of contact corrosion).
Technical specifications
Max. temperature | 100 °C |
Min. temperature | -40 °C |
Resistant to: | ageing, weather resistant, ozone-resistant, strong bases |
Conditionally resistant to: | lyes, diluted acids |
Not resistant to: | oils, fuels |
Tensile Resistance | 4,00 N/mm² |
Tear Resistance | 9,00 N/mm |
Elongation at break | 500 % |
Compression set | 40% (70°C/24 h) |
Hardness | 45+/-5° Shore A |
Material base body | PE |
Material insulation body | EPDM |
Software
This product is available in the following software.
