GE F 80 - 161/200

Pivot Joint GE 161/200-F100 HCP

Group: A437

Part number 115866

Bracing element for single-armed cantilevers with the siFramo 100 support system on steel beams with flange widths between 80 and 300 mm

Also suitable for bracing frame structures

Pivot installation possible at angles from 25° to 155°

Technical Data
Installation

Technical Data

B_P	310 mm
H_P	320 mm
B_P1	200 mm
H_P1	260 mm
t_P	12 mm
L	180 mm
W_min	25°
W_max	155°

Pivot Joint GE F - ST F 100 with pre-attached base plate

Load range

-V_X,perm.	16,50 kN
V_X,perm.	16,50 kN

Technical specifications

Material base body	steel
Surface	HCP
Corossion class	C4

Also available with DUALSHIELD for high corrosion protection within C5H environments.

Certification

Installation

Attachment of the Joints to steel structure by means of Assembly Set MS 5P M12 S while connecting the base plate. From size 161/200 plate, beam clamp set MS 5P M16 S must be used for clamping to steel beams. Another option is to fix the Joint to concrete walls by means of 4 heavy-duty anchors M12.
The support profile TP F 100 plugged onto the octagon is attached by means of 4 Self Forming Screws. The sawing length of the support profile can be determined using the table below.
After installation at the desired angle the screws have to be tightened with 40 Nm.

By loosening the screw connection between Joint and Joining Plate it is possible to rotate the Joint by 90° and to use it for a cross member then (see figure).

Angle: 25° - 155°