> 317 mm
Pipe Shoe LD-HV 90 HCP
Group: A731
Height-adjustable Pipe Shoe, heightadjustment in steps of 2.5mm, delivery height of 90 mm - suitable for sliding pipe supports
Suitable for steel beams, with a minimum flange width of 80 mm
Flexible in combination with other Sikla components to create guide or fixed points.
Overview of Types
General Information
Height-adjustable, double-clamp pipe shoe with two bars and a delivery height of 90 mm. Height adjustment in 2.5 mm increments. Particularly suitable for sliding pipe supports on suitable surfaces. A minimum flange width of 80 mm is recommended when mounting on steel beams. Guide or fixed points can also be created by combining with other Sikla components.
Certification
Technical specifications
Max. temperature | 300 °C |
Min. temperature | -20 °C |
Max. temperature sliding element | 130 °C |
Min. temperature sliding element | -20 °C |
Pipe shoe static coefficient of friction u (without sliding plate) - siFramo and siMotec | 0,3 |
Pipe shoe static coefficient of friction u (with sliding plate) - siFramo and siMotec | 0,2 |
Primary element material | steel |
Sliding element material | PA 6.0 |
Connecting element material | steel |
Surface finish | HCP |
Corrosion protection class | C4 |
Software
This product is available in the following software.
Installation
To guarantee that both sliding plates rest correctly, both webs must be adjusted to exactly the same height.
| Type | Height H as delivered [mm] | Height H Range [mm] |
|---|---|---|
| HV 90 | 90 | 88,5 - 113,5 |
Tightening torque screw connections
| Clamping bolts | Tightening torque [Nm] | Height adjustment | Tightening torque [Nm] |
|---|---|---|---|
| DN 200 | 50 | Bolts in the bar | 80 |
| DN 250 - 600 | 60 | Bolts in the bar | 80 |
Documents
- Sikla Pipe Supports - Comprehensive Solutions for Secure and Efficient Installations
PDF (5.52MB)
- Pipe Shoes LD-HV Type Overview
PDF (0.19MB)
- Load Capacities for Pipe Supports LD HV - Sikla Technical Data
PDF (0.26MB)