From DN 100

Pipe Shoe LC-HV 90 266-273 (DN 250) HCP

Group: A731

Part number 110072

Height-adjustable Pipe Shoe, heightadjustment in steps of 2.5mm, delivery height of 90 mm - suitable for sliding pipe supports

Suitable for steel beams, with a minimum flange width of 80 mm

Flexible in combination with other Sikla components to create guide or fixed points.

Technical Data
Installation
Documents

Technical Data

b	50 mm
B₂	105 mm
D	273 mm
D₁	273 mm
H	90 mm
H_{V min}	88,5 mm
H_{V max}	113,5 mm
L₂	255,6 mm
S_G	M12
S_L	55 mm
t	5 mm
W	45°

Upper and lower part are bolted together allowing height adjustment. The slide plate is fixed to the lower part. In order to reduce the spacings of the lugs the pipe clamps from DN 100 are rotated by 45° (see illustration).

Technical specifications

Max. temperature	300 °C
Min. temperature	-20 °C
max. temperature sliding element	130 °C
min. temperature sliding element	-20 °C

Friction coefficient µ static Pipe shoe foot (without sliding plate) / siFramo and siMotec	0,3
Friction coefficient µ static Pipe shoe foot (with sliding plate) / siFramo and siMotec	0,2

Material base body	steel
Material sliding element	PA 6.0
Surface	HCP
Corossion class	C4

Also available with DUALSHIELD for high corrosion protection within C5H environments. Minimum quantities must be observed for pipe shoes outside the DN range. In addition, delivery times apply for these items on request.

Certification

Installation

Type	Height H as delivered [mm]	Height H Range [mm]
HV 90	90	88,5 - 113,5

Tightening torque screw connections

Clamping bolts	Tightening torque [Nm]	Height adjustment	Tightening torque [Nm]
DN 15 - 40	40	Bolts in the bar	80
DN 50 - 200	50	Bolts in the bar	80
DN 250 - 300	60	Bolts in the bar	80

Documents

Brochures

Sikla Pipe Supports - Comprehensive Solutions for Secure and Efficient Installations
PDF (5.52MB)

Datasheets

Pipe Shoes LC-HV Type Overview
PDF (0.19MB)

Datasheets / Loads

Load Capacities for Pipe Supports LC HV - Sikla Technical Data
PDF (0.26MB)