Pipe Clamp STABIL RB-A 447- 457 HCP
Group: 1860
Part number 112818
For high static requirements in general plant construction
Design similar to DIN 3567 with statically balanced perforations
Choose your country
Go to your local Sikla page and discover offers for your country or sales region:
Country
Group: 1860
Part number 112818
For high static requirements in general plant construction
Design similar to DIN 3567 with statically balanced perforations
RB-A HCP Type Overview
PDF (232 KB)
B1 | 558 mm |
b1 | 70 mm |
D | 457 mm |
D1 | 457 mm |
d | 17 mm |
e | 518 mm |
H | 473 mm |
t | 8 mm |
Two-piece pipe clamp delivered without bolts.
For suitable bolts, please see catalog.
-VZ,perm. | 42,00 kN |
Admissible load valid with fixation on both sides.
The max. permissible load capacity of the connected parts (e.g. anchors) shall be considered.
The max. adm. load capacity is determined by the application of statistical methods resulting from the breaking loads, under observance of a max. adm. deformation of 1.5 mm resp. 2% of the max. stretchable pipe dia.
Primary element material | steel |
Surface finish | HCP |
Corrosion protection class | C4 |
Tightening torque and recommended clamping bolts:
| Size range [mm] | Recommended clamping bolts | Tightening torque [Nm] |
|---|---|---|
| 14 - 49 | M10 x 40 | 20 |
| 57 - 109 | M12 x 45 | 40 |
| 109 - 163 | M12 x 50 | 40 |
| 163 - 273 | M12 x 55 | 40 |
| 317 - 374 | M16 x 60 | 100 |
| 397 - 610 | M16 x 65 | 100 |
Certification
