31 - 129 mm
Pipe Clamp STABIL-D-2G VDS/FM 76- 81 DN 65 HCP
Group: 1884
Part number 808269
Installation of pipes required for all M&E services
Suitable for ceiling, floor and wall mounting.
Choose your country
Go to your local Sikla page and discover offers for your country or sales region:
Country
31 - 129 mm
Group: 1884
Part number 808269
Installation of pipes required for all M&E services
Suitable for ceiling, floor and wall mounting.
FM Approval Statement – Stabil D-2G Pipe Clamp
PDF (16.5 KB)
VdS Approval - Sikla Stabil D-3G wo/lining - G4920027
PDF (984 KB)
B1 | 144 mm |
b1 | 30 mm |
D | 81 mm |
D1 | 81 mm |
e | 115 mm |
H | 108,5 mm |
H3 | 21 mm |
Ma | M16 |
Mi2 | M10 |
SA | SW13 |
SG | M8 |
SL | 30 mm |
t | 3 mm |
KI2 | 12,08 mm |
KA | 22,79 mm |
Sizes 15 to 129 mm are equipped with welded nuts for the clamping bolts. On the joint side, the clamping bolt is pre-assembled; the clamping bolt on the opposite side is mounted into the bore hole and retained by a plastic washer, thus preventing any accidental unscrewing.
With welded in 3G triple thread nut; without sound absorption lining. For further adapter-based connection options via the external thread of the 3G triple thread nut, see product 'Adapter AD f/f' (this chapter).
-VZ,perm. | 5,00 kN |
Primary element material | steel |
Connecting element material | steel |
Surface finish | HCP |
Corrosion protection class | C4 |
For FM applications, at least M10 must be used.
For VdS applications > 2“ to 4”, at least M10 must be used.
Tightening torques:
| Size range [mm] | Tightening torque [Nm] |
|---|---|
| 15 - 72 | 2 |
| 76 - 129 | 3 |
| 133 - 173 | 5 |
| 176 - 316 | 10 |
Certification
VdS-Approval No. G4920027 up to 8"
FM Approval applies only to the following variants:
- STABIL D-3G in sizes from 31 to 129 mm with a production date up to 04/2026
- STABIL D-3G in sizes from 133 to 173 mm
- STABIL D-2G in all sizes
Further FM-approved pipe clamp: STABIL D-M16