Pipe Clamp STABIL D-2G 74- 78 A4
Group: 1740
Part number 172640
Installation of pipes required for all M&E services
Suitable for ceiling, floor and wall mounting.
Technical Data
b1 | 30 mm |
D | 78 mm |
D1 | 78 mm |
d | 11,5 mm |
e | 116 mm |
H | 105 mm |
H3 | 21 mm |
Ma | M16 |
Mi1 | M10 |
t | 3 mm |
Two-piece pipe clamp with clamping bolts and nuts (supplied loose).
Load range
-VZ,perm. | 5,00 kN |
The recommended load is calculated using specific statistical methods relating to break load and is designed to restrict deflection to 1.5 mm or 2 % of the maximum applicable clamping diameter.
Technical specifications
Material base body | Stainless Steel A4 |
Material connecting element | Stainless Steel A4 |
Corossion class | CRC II – III (C4 – C5 acc. to DIN EN ISO 12944-2) |
Certification
This product is has obtained the "RAL Gütezeichen Rohrbefestigung" and is subject to external surveillance according to RAL GZ-655.
Installation
Suitable for single-point mounting either directly by means of a threaded rod or by connecting to a Sikla Threaded Tube up to 1" using an adapter.
| Size range [mm] | Tightening torque [Nm] |
|---|---|
| 18 - 51 | 3 |
| 54 - 122 | 5 |
| 133 - 207 | 10 |
| 210 - 231 | 20 |
Documents
- Pipe Clamp Stabil D2G/3G with Lining – RAL-GZ 655
PDF (0.21MB)