Eye-Plate HP 80/99 - B M12 HCP
Group: A299
Part number 113027
Connecting component for direct attachment of rod hanger assemblies to beam sections with flange width 80–99 mm
Pre-welded Eye-Plate serves as a base for connecting Rod Hanger Load Chain Assembly LKV (sizes M10 to M16) and Pipe Clamps type Stabil Form C LK
Technical Data
B | 45 mm |
BP | 200 mm |
BP1 | 95 mm |
bP | 13 mm |
d | 13 mm |
HP | 60 mm |
IZP | 20 mm |
LG | 77 mm |
tP | 12 mm |
t | 8 mm |
Load range
-VZ,perm. | 12,10 kN |
The implementation and construction requirements of the components, their design as well as their verifications and load tests were carried out following the standards VGB R 510 L part I, KTA 3205.3 and DIN EN 13480-3.
Technical specifications
Material base body | steel |
Surface | HCP |
Corossion class | C4 |
Note: Delivery date on request
Certification
Installation
The Beam System Eye-Plate HP 80/99 is clamped to the supporting steel beam section by means of Assembly Set MS 5P M12 S2. The Eye-Plate can also be fastened directly to concrete by means of 2no. M12 anchors.
Type A: Load Chain runs crosswise to the beam
Type B: Load Chain runs longitudinally to the beam