End Tee IR-E 41/52D
Group: 1334
Part number 116600
Cross Tee IR-E for creating end connections in installation grids made of Channels 41
In combination with Cross Tee IR-M and Channels 41, a complete installation grid can be created
Enables cost- and time-saving adjustment of pipe and cable supplies with flexible modification options
Technical Data
1 x Suspension Holding Bracket IR-RA M10
1 x hooked feeder plate
1 x clamping plate
1 x hexagon bolt M10 x 25
1 x Speed Nut NT CC 41
Load range
-VZ,perm. | 6,00 kN |
Note: Working load per fixing point.
Technical specifications
Material base body | steel |
Material connecting element | steel |
Surface | electro galvanized (Fe//Zn) |
Corossion class | C2 |
Certification
Installation
1. Mount the hooked feeder plate of the End Tee to the main runner.
2. Place the suspension holding bracket over the hooked feeder plate and tighten it.
3. Insert the cross strut section into the hooked feeder plate and fix it by means of the clamping plate, Speed Nut NT CC 41 and hexagon bolt.
Tightening torque: 10 Nm
| Type | appropiate main runner | appropiate cross strut section |
|---|---|---|
| IR-E 41/52 D | MS 41/52 D | MS 41/41, 41/52, 41/62 |
| IR-E 41/62 D | MS 41/62 D | MS 41/41, 41/52, 41/62 |