2G
Ducting Clamp PLU TOP 2G ME DN 180
Group: 1623
Part number 111794
Two-piece pipe clamp for simple installation of spiral-seam ducts
Suitable for soundproof installation according to DIN 4109
Technical Data
B1 | 228 mm |
b2 | 22,8 mm |
D | 184,2 mm |
D2 | 184,2 mm |
e | 211 mm |
H | 213 mm |
Mi1 | M8 |
Mi2 | M10 |
t | 1,5 mm |
With glued-in rubber profile. Clamping bolts are pre-mounted and retained. Pivot screw for safe and simple assembly with quick-set clip, suitable for 'single-hand' mounting. Easier handling and better storage possibilities due to optimized packaging
Load range
-VZ,perm. | 0,80 kN |
Technical specifications
Max. temperature | 110 °C |
Min. temperature | -50 °C |
Material base body | steel |
Material insulation body | SBR/EPDM |
Material connecting element | steel |
Surface | electro galvanized (Fe//Zn) |
Corossion class | C2 |
Certification
Installation
Tighten upper part of the pipe clamp without the interfering lower part. Hook lower part, provided with a keyhole, into the fixed clamping bolt. After inserting the pipe and locating into the pivot screw, the clamping bolt head is located behind the angled profiles; then tighten clamping bolt with max. 2 Nm.