2G
Ducting Clamp PLU 2G-N DN 224
Group: 1622
Part number 199732
Two-piece pipe clamp for simple installation of spiral-seam ducts.
Technical Data
B1 | 274 mm |
b1 | 25 mm |
D | 236 mm |
D1 | 236 mm |
e | 257 mm |
H | 259 mm |
Mi1 | M8 |
Mi2 | M10 |
t | 1,5 mm |
Clamping bolts are pre-mounted and retained. Pivot screw for safe and simple assembly with quick-set clip, suitable for 'single-hand' mounting. Easier handling and better storage possibilities due to optimized packaging.
Load range
-VZ,perm. | 1,00 kN |
Technical specifications
Material base body | steel |
Material connecting element | steel |
Surface | electro galvanized (Fe//Zn) |
Corossion class | C2 |
Certification
Installation
Tighten upper part of the pipe clamp without the interfering lower part. Hook the lower part, provided with a keyhole, into the fixed clamping bolt. After mounting of the pipe and locating into the pivot screw, the clamping bolt is fixed behind the bending; then tighten clamping bolt with max. 2 Nm.
Thread connection: M8/M10