Corner Bracket WD F 80 HCP
Group: A430
90° connection of TP F 80 beam sections with form-fit connection using Self Forming Screw FLS F
Flexible structures with high load-bearing capacity through the use of the Corner Bracket WD F 80
Overview of Types
General Information
Component to be used for connections between two F 80 sections when the structural design requires an alternative to the End Support STA F 80 as the default solution. Connections with the Corner Bracket WD F 80 allow flexible constructions and provide a high load capacity at the same time. The central hole allows for the integration of diagonal cross-bracing allowing more complex structures to be made.
Certification
Technical specifications
Primary element material | steel |
Surface finish | HCP |
Corrosion protection class | C4 |
Load range
Type | Max tensile load (in drilled hole) |
WD F 80 HCP | 45,30 kN |
The specified load values are design loads Rd and include a partial safety factor γM2 = 1.25 (DIN EN 1993-1-8:2025-04, Table 4.1)
A partial safety factor of γG = 1.35 (DIN EN 1990:2021-10, Table A1.2(B)) must be taken into account for permanent loads.
Also available with DualShield for high corrosion protection within C5H environments.
Software
This product is available in the following software.
Installation
To be used in pairs only. 8 pieces of Self Forming Screw FLS are necessary for one Corner Bracket.