AK F 80-E
Type E
Cantilever Bracket AK F 80-E HCP
Group: A420
Galvanised hollow-box section with welded end plate serving as a cantilever arm
Can be used as a crossbar with End Support STA and Self Forming Screws FLS
Direct connection to cast-in channels possible via round holes in the base plate
Overview of Types
General Information
Galvanised hollow-box-section with welded end-plate to serve as cantilever arm. May be used as a crossbar when combined with End Support STA and 4 x Self Forming Screw FLS. By means of the round holes in the base plate a direct connection to excisting cast-in channels is possible.
Certification
CE mark (Declaration of performance see downloads)
ETA-24/0471
Technical specifications
Material base body | steel |
Surface | HCP |
Corossion class | C4 |
Load range
Type | -VX,perm. | VX,perm. | -VY,perm. | VY,perm. | VZ,perm. |
AK-E F 80/30- 400 HCP | 9,00 kN | 9,00 kN | 9,40 kN | 9,40 kN | 8,20 kN |
AK-E F 80/30- 800 HCP | 9,00 kN | 9,00 kN | 9,40 kN | 9,40 kN | 8,20 kN |
AK-E F 80- 600 HCP | 17,00 kN | 17,00 kN | 9,10 kN | 9,10 kN | 31,30 kN |
Type | -MX,perm. | MX,perm. | MY,perm. | -MZ,perm. | MZ,perm. |
AK-E F 80/30- 400 HCP | 0,5 kNm | 0,5 kNm | 0,10 kNm | 0,5 kNm | 0,5 kNm |
AK-E F 80/30- 800 HCP | 0,5 kNm | 0,5 kNm | 0,10 kNm | 0,5 kNm | 0,5 kNm |
AK-E F 80- 600 HCP | 2,1 kNm | 2,1 kNm | 2,20 kNm | 0,8 kNm | 0,8 kNm |
Also available with DUALSHIELD for high corrosion protection within C5H environments.
Software
This product is available in the following software.
Installation
AK-E F 80: With 4 x Self Forming Screw FLS when fixed to another siFramo hollow-box-section. Alternatively with two suitable wall anchors through holes “A” when fixed directly to building structure.
AK-E F 80/30: With 2 x Self Forming Screw FLS when fixed to another siFramo hollow-box-section. Alternatively with two suitable wall anchors through holes “A” when fixed directly to building structure.
Configuration AK-E F 80: Plate welded to Beam section F 80
Configuration AK-E F 80/30: Plate welded to Beam section F 80/30
Documents
- siFramo - ETA-24/0471
PDF (2.15MB)