Cantilever Bracket AK-E F100- 600 HCP

Group: A820

Part number 113070

Galvanised hollow-box section with welded end plate serving as a cantilever arm

Can be used as a crossbar with End Support STA and Self Forming Screws FLS

Types F 100-80 and F 100-80-E allow combination of Beam Section F 100 with F 80/80

Technical Data

Documents

Approvals / ETA

siFramo - ETA-24/0471
PDF (2.15 MB)

B_P	100 mm
H_P	185 mm
L_G	609 mm
t_P	8 mm

Load range

-V_X,Rd	23,8 kN
V_X,Rd	23,8 kN
-V_Y,Rd	17,1 kN
V_Y,Rd	17,1 kN
V_Z,Rd	38,5 kN

-M_X,Rd	1,7 kNm
M_X,Rd	1,7 kNm
M_Y,Rd	3,7 kNm
-M_Z,Rd	1,1 kNm
M_Z,Rd	1,1 kNm

The specified load values are design loads Rd and include a partial safety factor γM2 = 1.25 (DIN EN 1993-1-8:2025-04, Table 4.1)
A partial safety factor of γG = 1.35 (DIN EN 1990:2021-10, Table A1.2(B)) must be taken into account for permanent loads.

Technical specifications

Primary element material	steel
Surface finish	HCP
Corrosion protection class	C4

Also available with DualShield for high corrosion protection within C5H environments.

Installation

AK-E F 100: With 4 x Self Forming Screw FLS when fixed to another siFramo hollow-box-section. Alternatively with two suitable wall anchors through holes “A” when fixed directly to building structure.
AK-E F 160-100: With 4 x Self Forming Screw FLS when fixed to another siFramo 100/160 (flange side 160) hollow- box- section. Fixing to walls and ceilings with 4 suitable wall anchors M10.

Configuration AK-E F 100 and AK-E F 160-100: Plate welded to Beam Section F 100
Configuration AK-E F 100-80: Plate welded to Beam Section F 80