Go to your local Sikla page and discover offers for your country or sales region:

Country

Choose your country

Go to your local Sikla page and discover offers for your country or sales region:

Country

Print PDF

Blockset PBS 46 M 8 X 90 HCP

Group: B115

Part number 803553

Quick assembly system for attaching pipe clamps and components to the siMetrix Profile PRO 46

Self-retaining thanks to the shape, yet easily movable by hand

Easy height adjustment with 10 mm spaced grooves for shortening using Rod Cutter PBC without sawing or re-cutting threads

Technical Data

CAD

B	42,5 mm
H	90 mm
H₁	72 mm
L	47 mm

Blockset with pressix rod completely pre-assembled - types M8 x 50 and M10 x 50 with threaded rod.

Load range

-V_X,perm.	0,54 kN
V_X,perm.	0,54 kN
-V_Y,perm.	2,54 kN
V_Y,perm.	2,54 kN
-V_Z,perm.	4,52 kN
V_Z,perm.	4,52 kN

-M_X,perm.	0,04 kNm
M_X,perm.	0,04 kNm
-M_Y,perm.	0,05 kNm
M_Y,perm.	0,05 kNm

Following loads direction not RAL-tested: V(X), V(y), M(x) und M(y)

Technical specifications

Primary element material	steel
Surface finish	HCP
Corrosion protection class	C4

Installation

Snap the Blockset onto the profile, then tighten the connecting element with a lock nut. To disassemble, loosen the lock nut and press on the shoulder (highest point) of the blockset upper part and pull it off the profile. Pressix rod secured against unscrewing.

Tightening torque: 15 Nm

Certification

This product has been awarded the RAL quality mark "Pipe Supports" and is subject to continuous external monitoring according to RAL GZ-655.