TP F 80
TP F 80/30
Beam Section TP F 80 HCP
Group: A410
Galvanised box-section for fabrication of steel frames, simple two-dimensional supports and complex volumetric arrangements.
Closed profile shape enables high torsional rigidity and flexible attachment of connecting elements and pipe brackets on all four sides.
Stepless adjustment with form-fit through coordinated hole pattern and Form Lock Screw for maximum adaptibility and stability
Overview of Types
General Information
Galvanised box-section for fabrication of steel frames. Designed for both simple two-dimensional supports and complex volumetric arrangements. Holes are designed to receive Self Forming Screw FLS in conjunction with relevant components.
Certification
Technical specifications
Primary element material | steel |
Surface finish | HCP |
Corrosion protection class | C4 |
Load range
Type | -VX,perm. | VX,perm. | -VY,perm. | VY,perm. | -VZ,perm. | VZ,perm. |
TP F 80/30 6M HCP | 155,40 kN | 155,40 kN | 14,90 kN | 14,90 kN | 8,10 kN | 8,10 kN |
TP F 80 6M HCP | 193,60 kN | 193,60 kN | 20,80 kN | 20,80 kN | 20,80 kN | 20,80 kN |
Type | -MX,perm. | MX,perm. | -MY,perm. | MY,perm. | -MZ,perm. | MZ,perm. |
TP F 80/30 6M HCP | 0,4 kNm | 0,4 kNm | 2,2 kNm | 2,2 kNm | 1,3 kNm | 1,3 kNm |
TP F 80 6M HCP | 1,3 kNm | 1,3 kNm | 40 kNm | 40 kNm | 40 kNm | 40 kNm |
Type | Elastic modulus Wy | Elastic modulus Wz | Second moment of area Iy | Second Moment of Area Iz |
TP F 80/30 6M HCP | 7,75 cm³ | 4,12 cm³ | 33,15 cm^4 | 6,23 cm^4 |
TP F 80 6M HCP | 13,25 cm³ | 13,25 cm³ | 61,54 cm^4 | 61,54 cm^4 |
Type | Torsional constant It | Cross-sectional Area A |
TP F 80/30 6M HCP | 7,91 cm^4 | 2,57 cm² |
TP F 80 6M HCP | 45,13 cm^4 | 4,73 cm² |
The specified load values are design loads Rd and include a partial safety factor γM2 = 1.25 (DIN EN 1993-1-8:2025-04, Table 4.1)
A partial safety factor of γG = 1.35 (DIN EN 1990:2021-10, Table A1.2(B)) must be taken into account for permanent loads.
Software
This product is available in the following software.
