DN 100 - 150
Assembly Group BG22 F 80 DN 100 HCP
Group: 1102
Part number 110244
Assembly group for fastening pipes without complex requirements and without heat insulation on SiFramo F 80 sections
Guided supports and fixed points can be created by adapting the supplied hexagon nuts
Supplied U Bolt fasteners vary depending on the required clamping range
Technical Data
e | 136 mm |
H | 181 mm |
Each Assembly Group is pre-assembled, packed and labeled. For U-bolts with a size of DN 100 upwards, always use two U Bolt Fastening UB Fs.
Parts list:
Item 1 U Bolt Fastening UB F
Item 2 Self Forming Screw FLS F
Item 3 U Bolt RUB
Item 4 Pad U-UB F 80
Technical specifications
Material base body | steel |
Material sliding element | PA 6.0 |
Material connecting element | steel |
Surface | HCP |
Corossion class | C4 |
Certification
Installation
The assembly of the individual components to form an Assembly Group is carried out during the course of pipe installation on the construction site. When used as a guided support, the nuts located both above and below the UB fastening must be tightened, enabling the pipe to freely move. In the case of fixed points, the permissible forces of the structural connection and bending forces of the bolt must not be exceeded.