Choose your country
Go to your local Sikla page and discover offers for your country or sales region:
Country
DN 15 - 40
Group: 1102
Part number 110239
Assembly group for fastening pipes without complex requirements and without heat insulation on SiFramo F 80 sections
Guided supports and fixed points can be created by adapting the supplied hexagon nuts
Supplied U Bolt fasteners vary depending on the required clamping range
e | 56 mm |
H | 85 mm |
Each Assembly Group is pre-assembled, packed and labeled. For U-bolts with a size of DN 100 upwards, always use two U Bolt Fastening UB Fs.
Parts list:
Item 1 U Bolt Fastening UB F
Item 2 Self Forming Screw FLS F
Item 3 U Bolt RUB
Item 4 Pad U-UB F 80
Primary element material | steel |
Sliding element material | PA 6.0 |
Connecting element material | steel |
Surface finish | HCP |
Corrosion protection class | C4 |
The assembly of the individual components to form an Assembly Group is carried out during the course of pipe installation on the construction site. When used as a guided support, the nuts located both above and below the UB fastening must be tightened, enabling the pipe to freely move. In the case of fixed points, the permissible forces of the structural connection and bending forces of the bolt must not be exceeded.
Certification
