U Bolt RUB 46 76,1MM (2 1/2'') HCP
Group: B112
Part number 805059
U Bolt RUB 46 for fastening pipes in utility systems to Profile PRO 46
Used as a fixed point or as a guide for horizontal and vertical pipes
Technical Data
D | 73.95 mm |
D2 | 73.95 mm |
e | 100 mm |
H | 156.45 mm |
H2 | 90 mm |
H3 | 143.45 mm |
Ma | M10 |
SW | 17 mm |
Completely pre-assembled as a set, consisting of:
2 x Profile Clip MPK 46
2 x nuts on each side
1 x U Bolt with sheath (for electro-chemical separation)
1 x Slide Support GA 41-46 (enclosed)
Load range
-VX,perm. | 1,07 kN |
VX,perm. | 1,07 kN |
-VY,perm. | 1,04 kN |
VY,perm. | 1,04 kN |
-VZ,perm. | 5,42 kN |
VZ,perm. | 5,42 kN |
Technical specifications
Halogen-free | Yes |
UV-resistant | Yes |
Material base body | steel |
Material insulation body | PA 6.0 |
Surface | HCP |
Corossion class | C4 |
Certification
CAD
Installation
When used as a guide bearing, nuts arranged on both sides at the top and bottom of the round steel bracket must be tightened. The pipe should remain freely movable.
When used as a fixed point, first tighten the lower nuts until the pipe is clamped. Then tighten the upper nuts. For fixed points, the permissible forces of the structural connection and the bending loads of the U Bolt must not be exceeded.